Display App (Deprecated)

Controller-3 1.2.2

Release date: 04/01/2024

Broadcast clutch output state

Controller-3 1.2.1

Release date: 02/13/2024

Integrate RPM sensor for PTO pumps

1.18.2

Release date: 12/12/2023

Fixes a bug preventing negative inlet values

Controller-2 1.0.1

Release date: 12/08/2023

Broadcast boot message
Increase length of CAN timeout

Controller-3 1.2.0

Release date: 12/08/2023

Broadcast boot message
Increase length of CAN timeout
Enable 5V sensor outputs

1.18.1

Release date: 11/30/2023

Faster display boot time
Log controller boot CAN message

1.18.0

Release date: 11/21/2023

Enables software updates for controller modules
Error reporting on Dashboards
Bug fixes and improvements

Controller-1 1.0.0

Release date: 09/28/2023

Broadcast software version

Controller-2 1.0.0

Release date: 09/28/2023

Broadcast software version

1.17.2

Release date: 09/18/2023

Improved handling of Low Hyd. Oil engine shutdown
Increase Vibration Sensor range
Optimization improvements

1.17.1

Release date: 09/08/2023

Show target RPM on hydrostat page
Enable Low Hyd. Oil Alarm by default
Various fixes & error handling improvements

1.17.0

Release date: 09/07/2023

Set engine RPM presets using the new Engine Rpm Presets dashboard widget
Add digital output overrides on the Diagnostics Page
Allow aborting active engine idle/resume processes
Adds vibration sensor & other flexible analog/digital inputs for some systems
Add valve control to the Hydrostat page
Bug fixes & improvements

Controller-3 1.1.1

Release date: 09/07/2023

Fixes for reading flex digital inputs
Adjust CAN variable placement

Controller-3 1.1.0

Release date: 08/30/2024

PTO throttle command outputs
Internal improvements

1.16.3

Release date: 08/24/2023

Improve S.Z info publishing
Improvements to hydrostat pump signal

Controller-3 1.0.1

Release date: 08/24/2023

Calculate kp gains with extra settings sent via CAN

1.16.2

Release date: 08/07/2024

Hydrostat control
UI and navigation improvements
Limit high volume pump speed
Use display I/O for hyd. oil cooler fan state

Controller-3 1.0.0

Release date: 08/07/2024

Hydrostat pump signal

1.16.1

Release date: 07/26/2023

Abort shutdown delay option
Don’t retain unnecessary MQTT messages
Adjust log metrics to more efficiently use network
Shutdown delay cancel behavior

1.16.0

Release date: 06/16/2023

Show an alert if the engine idles too long
Shutdown delay setting for Unit Stop
Remote log file uploads

1.15.0

Release date: 05/30/2023

Various improvements
Fix S.Z not automatically reconnecting
Show clutch disengaging status on engine control widget
Show updates available dialog
Check the engine is Off before installing updates
Fix uploading the same log to S.Z

1.14.0

Release date: 05/15/2023

Remote clutch engage countdown
Performance improvements

1.13.0

Release date: 04/21/2023

Automatically dim backlight when the display is inactive
Calculations for estimating when to clear the drag line
Valve improvements

1.12.8

Release date: 03/03/2023

Connection stability improvements

1.12.7

Release date: 02/15/2023

Fix S.Z connection issues

1.12.6

Release date: 02/09/2023

Fix S.Z connection issues
Reduce redundant log uploads
Block network requests when the network is connected with internet
Update logo

1.12.5

Release date: 12/21/2022

Fix S.Z token refresh issues

1.12.4

Release date: 11/22/2022

Remote control valves are disabled with the valve setting
Cancel resume process when idle is started

1.12.3

Release date: 10/27/2022

Remove Unit Name feature
Add hyd. oil temperature readout
Hyd. oil level error does not shutdown engines with clutch drive

1.12.2

Release date: 10/18/2022

Upload serial logs with .txt type
Add hyd. temperature sensor fail safe
Increase temperature points for hyd. oil temp warnings

1.12.1

Release date: 09/22/2022

Fixes an issue calculating the filtered analog sensor values

1.12.0

Release date: 09/21/2022

Upload OS logs
Add shutdown period before turning off the display
Add device ID to the “About” screen
Show S.Z service readout in the Diagnostics page
Device versions list on S.Z
Internal improvements

1.11.6

Release date: 09/15/2022

Enable upload logs config

1.11.3

Release date: 09/09/2022

Increase J1939 throttle broadcast

1.11.2

Release date: 09/02/2022

Tier 3 engine RPM drops without target change

1.11.1

Release date: 08/08/2022

Unit shutdown: direct drive engine shuts down before valves close

1.11.0

Release date: 07/29/2022

Add device serial number and name to Diagnostics page
Track clutch engaged hours
Fixed bug where cruise control could set the RPM lower than the minimum setpoint
Button reset S.Z connection
Added diagnostic network tests
Upload logs from Diagnostics page
Fix issue where unit stop did not shutdown direct drive pump

1.10.0

Release date: 06/02/2022

Idling the engine stored the current RPM, not the setpoint
Clutch disengage can shutdown the engine
Rename cruise control settings
Hyd. oil temp reading always enabled

1.9.0

Release date: 05/06/2022

Add flow meter totalizers

1.8.0

Release date: 03/08/2022

Add delay to clutch re-engage Button
Internal improvements

1.7.0

Release date: 10/26/2021

Allow software version to be selected for OTA update

1.6.0

Release date: 10/21/2021

Add triggers to send alerts to S.Z
Allow decimal points for flex AIN1 sensor value on S.Z

1.5.0

Release date: 10/14/2021

App loses CAN connection
Add DEF level value to S.Z reporting

1.4.0

Release date: 10/07/2021

Add GPS reporting

1.3.0

Release date: 10/05/2021

S.Z commands stop working after a token refresh

1.2.0

Release date: 09/30/2021

Add new variables to S.Z reporting
Add IMU configuration file

1.1.0

Release date: 09/24/2021

Implement OTA updates
Add a display info page